top of page

PRODUCT HIGHLIGHTS

  • Load Capacity: 15 kg
  • Maximum Height: 1.75 m
  • Minimum Height: 23 cm
  • VH-10 Fluid Ball Head with Pan Handle
  • 4 x Leg Sections
  • 3 x Bubble Levels
  • Weight: 5.5 lb
  • Removable Leg for Monopod Use
  • Twist Leg Locks
  • Aluminium Construction

Sirui VHD-2004 Tripod with VH10 Head

$80.00Price
  • PRODUCT HIGHLIGHTS

    • Load Capacity: 15 kg
    • Maximum Height: 1.75 m
    • Minimum Height: 23 cm
    • VH-10 Fluid Ball Head with Pan Handle
    • 4 x Leg Sections
    • 3 x Bubble Levels
    • Weight: 5.5 lb
    • Removable Leg for Monopod Use
    • Twist Leg Locks
    • Aluminium Construction

     

    Watch this video of the VHD-2004 Photo/Video Tripod with VH-10 Fluid Ball Head:

    https://youtu.be/ATgJLmEIUqQ 

     

     

    This aluminium VHD-2004 Photo/Video Tripod with VH-10 Fluid Ball Head from Sirui consists of four-section padded legs, a rotating ball head, and a fluid head that together weigh 5.5 lb.

    The legs tighten with twist locks that adjust with a simple turn to extend the legs to a maximum height of 68.9". A second, short centre column is included which allows you to drop the tripod to a minimum height of 9.1" without having to lift the column up. One of the tripod legs disconnects and can be used as a monopod, if desired. A bubble level on the top of the legs helps with balance. The rubber feet are removable and can be swapped out for optional spikes, and the tripod also features a 1/4"-20 accessory mount.

    The ball head is installed on top of the tripod and supports compact DSLR or midsize cameras weighing up to 33.1 lb. A separate pan lock disengages and allows the head to rotate 360°. The ball also moves freely after unlocking the head's lever lock, and at the same time the cut notch on the side of the head permits you to position a camera at a set angle. The VH-10 fluid head connects to the ball head and features two bubble levels and a telescoping pan handle. A quick release plate with 1/4"-20 and 3/8"-16 threaded mounting screws is included with the head.

  • Camera Plate
    Camera Plate Features Sliding Balance Plate, Quick Release
    Camera Mounting Screw 1 x 1/4"-20 Male
    Head
    Base Mount 1/4"-20 Thread
    Bubble Level 2
    Accessory Mounting 1 x 1/4"-20 Female Thread
    Panning Range None
    Legs
    Leg Lock Type Twist Lock
    Leg Positions Locking 3 Positions and Continuously Adjustable
    Independent Leg Spread Yes
    Leg Sections 4
    Bubble Level Yes
    Feet Features Rubber
    Spreader None
    Detachable Monopod
    Leg Sections 4
    Monopod Foot Features Removable, Retractable, Rubber
    General
    Load Capacity 33.07 lb / 15 kg
    Maximum Working Height 68.9" / 175.01 cm
    Minimum Working Height 9.1" / 23.11 cm
    Materials Aluminum
    Weight 5.5 lb / 2.49 kg
bottom of page